|
|
|
|
Home
Juki Machine
Thread Packages
Warranty & Services
Other Products
How to Order
Contact Us
|
|
|
Getting Started
Q & A
Meet Cindy
Tips
|
|
|
Juki Machines
Juki TL-98Q «
Miscellaneous
1/4 in. Quilting Foot
1/5 in. Quilting Foot
Bobbins Case
Metal Bobbins
Plastic Bobbins
Walking Foot
Thread Packages
|
Tips
Make sure you keep your Juki TL-98Q well oiled. I run my Juki 4 to 6 hours a day and oil my machine about once a week. If your machine starts to sound rough, oil it again! Sometimes your darning foot might start to squeak. Simply add a small drop of oil to the spring and that should help.
Always use a good Schmetz needle for your quilting. A Topstitch 90/14 works best.
Threading tip. I run my thread from the needle bar through the small hole in the bobbin winder plate before threading it through the 3-hole plate. This reduces the vertical pull on the thread.
When using a clear polyester monofilament thread, I like to put my spool on the left spool holder, run the thread through the right hand thread guide on the needle bar first, the left one second and then through the bobbin winder plate hole. This type of thread is also threaded on the 3-hold plate \"under\" three times. This all helps to eliminate some of the twist of the thread.
Clean your machine often. Make sure you remove the top plate and remove excess lint. But, with Superior Threads... you should not have much lint. You can also lay the machine down flat, remove the screws from the bottom and clean or air-can blow it out.
|
|
|
